Results for

Heat engineering systems - Import export

662 Companies

24 Products

PROXICAD SRL

Italy

The company PROXICAD SRL, which operates in the Consultants - construction and civil engineering industry. It also operates in the Industrial facilities - design, 3d mechanical design, Industrial facilities - design, industrial application engineering, and heat engineering systems industries. It is based in San Giovanni Teatino (Ch), Italy.
SONDEX ITALIA

Italy
REGAWATT GMBH

Germany

ReGaWatt GmbH plans and builds highly-efficient energy systems based on all types of biomass made from mechanical pulp. The technological core component is an updraft gasifier with a fuel performance of 1 to 5 MW. The combination of this highly robust gasifier with different modules deigned to ensure clean combustion, gas cleaning systems, gas engines, ORC system, heat recovery, etc. gave rise to the Kombi Power System®. References can be found in Germany, Switzerland, the Netherlands and Japan. After a 10-year development process, pilot systems and second generation commercial systems, our aim is too make the Kombi Power System more cost effective and fuel-flexible. To this end, a small test system – fully equipped with gas cooling and ESP – has been designed and built. Thanks to this test system, we can now test and assess special customer fuels.
GASBUILD

Germany

GASBUILD is a full-cycle engineering company. It provides a range of services in the areas of construction, design, installation of engineering systems and after-sales services: gasification; ventilation; air conditioning; heating; service and automation of engineering systems; energy audit; alternative sources of electricity. Our work is a comprehensive project management anywhere in Ukraine. Organization of work of contractors, control and implementation of construction work, provision of services for setting up and starting up equipment. We take responsibility for all stages of design, construction and maintenance. The introduction of these systems for many years has been a priority for the development of professional growth of our employees and the company as a whole. GASBUILD specializes in making and installation of steel constructions, elevations and roof casings of industrial buildings. We are fully responsible for the implementation and long-term work of completed projects. We do all we can to fulfil our customers' requests and desires. Because we love what we do.
GRUBE GROUP

Germany

The Grube Group has been meeting the requirements of the market and performing services all around the world since 1974. Using different methods, the company specialises in assembly work for major industrial centres, thermal power plants and petrochemicals. This involves the use of mobile annealing lines and mobile machining equipment, among other machinery. Thanks not only to our long-standing expertise and state-of-the-art technology, but also our exceptional flexibility and mobility, the company is now the first-choice partner for industrial and major customers. In addition, our HR service is available 24 hours a day. A service you can trust. References from successful projects within Germany and abroad. In recent years, the Grube Group has supervised countless projects all across the world – from a chemical park in Belgium to a Russian pipeline in the Black Sea, from Bavaria to Algeria. The Grube Gruppe is always the right choice when particular quality and flexibility are required. We can offer the following for your project, among other services: Sophisticated plant technology, quality-oriented HR services, consumables and accessories, as well as quick and simple order processing. We also provide services in mobile machining technology, cutting, chamfering, machining sealing surfaces, pre-heating and annealing pipework, among other areas. You can find our entire range of products and services at our website www.grube.group. If you have any further questions, please do not hesitate to contact us.

Website

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

BISMONT D.O.O.

Germany

We are a company with 10 years of experience, specialising in installing heating, ventilation and plumbing solutions, and welding and locksmithing throughout Europe. We also offer our customers the option to have welded components produced at our plant in Lenart. The pride of our company is the EOScale brand, which represents the pinnacle of exclusive developments in the construction of modular homes. Our houses are functional, environmentally friendly, and energy efficient, and they integrate innovative solutions from the construction industry. EOScale homes offer innovative and sustainable living solutions that meet the highest quality and design standards. Bismont also has a modern production facility with advanced manufacturing capabilities to ensure precision and efficiency in all areas of our business, from assembly and welding to the production of modular homes. These capabilities underscore our commitment to staying at the cutting edge of technology and delivering projects of the highest quality. Backed by our expertise in assembly, welding, and the production of modular homes, we are eager to expand our international footprint and bring our expertise to a wider range of projects. We look forward to working with you and to using our many years of experience and innovation to ensure the success of your projects.

Website See all products
ERC ADDITIV GMBH

Germany

Additives and agents are used in many areas of daily life. We specialise in additives and services for fuels, combustibles and lubricants. There is a surprising variety of additives with properties that are quantifiably proven to improve the efficiency, performance and service life of your machines, engines and burners, or simply to achieve a product's DIN requirements. This is why, for example, there are no European petrol stations which sell fuel that does not contain additives. We are happy to offer you our experience and technical facilities for packaging your hazardous materials.

All the products for "heat engineering systems"

Flow Guard Premium

Radiator cleaner

grotamar® 82 - Diesel Additive

Guard Bio Thermic

Radiator Seal

See all products
NC MANUFACTURING AND ENGINEERING

Turkey

NC Manufacturing and Engineering is a company based in KOCAELİ, Turkey, specialized in the design and manufacturing of heat exchangers, cogeneration & trigeneration systems and exhaust gas technology systems. We have a wide product portfolio; •Shell & Tube Heat Exchanger •Finned Tube Radiator •Pressure Vessel •Economizer •Recuperator •Double tube heat exchanger •Container For Cogeneration & Trigeneration Systems •Mechanical Assembly and Manufacturing •Chimney and Exhaust Line •Fuel Tank •Exhaust Gas Silencer •Exhaust Gas Heat Exchanger •3 Way Diverter Damper Valve We are equipped with prominent software programs to make thermal and mechanical calculations, enabling us to design process equipment according to the current international codes and standards. We continue comprehensive engineering and design work in a versatile way to achieve the most effective designs in terms of high performance, low cost, and minimum environmental impact and using CAD tools, we provide our estimed customers with detailed fabrication drawings in 2D and 3D according to their requests. Don't hesitate to contact us for more information!

All the products for "heat engineering systems"

Economizer for boilers

Website See all products
RULAND ENGINEERING & CONSULTING GMBH

Germany

Process plants for treating liquids of all kinds: That is what Ruland does best. From consulting and engineering to plant construction, assembly and installation at the customer – we provide all services from one source. Modern automation concepts, always adapted to individual customer requirements, and comprehensive services such as spare parts management and maintenance complete the offer. Ruland plans and builds tank storage facilities, dosing and mixing systems, heating systems, HTST and UHT systems, filtration systems, fermentation systems, degassing systems, pigging systems, cleaning systems for pipework, aseptic systems and CIP systems as well as systems for special requirements. We implement plant expansion and optimisation projects with single modules or turnkey projects with complex process plants. Our 320 employees are based in Neustadt an der Weinstraße, in branches across Germany and in our subsidiaries in Russia and Poland.

Website
CONTHERMO GMBH & CO. KG

Germany

We produce high-tech equipment using thermal process engineering and designs. Our customers are well-known companies from the chemical industry, pharmaceutical industry and food industry. We design and manufacture all products ourselves. ConThermo works with the most modern measurement and control technology devices and develops for you the optimal air flow, temperature distribution and energy-efficient heating technology. The development of your thermal equipment takes place in our in-house 3D CAD design department, which means a high degree of individuality for your thermal equipment. Support and service are very important to us. Decades of experience of our engineers and business people offer you the guarantee that you will only receive sophisticated devices and systems from us. We also offer you expert and comprehensive advice. This applies both before the purchase and during our five-year warranty period.

Website

APROVIS

Germany

APROVIS – innovation from a single source. APROVIS is an energy company that is active across the world. Our expertise focuses on exhaust gas and gas processing technology. We are experts in single components and system solutions. High quality and reliability have been important to APROVIS since it was founded in 2000. With an export ratio of over 50%, APROVIS is the only provider of system solutions in the CHP market for combustion gases of gas-powered engines and integrated solutions for cogeneration units – with its own products. APROVIS achieves extremely quick delivery times. We also personally support each project from planning to commissioning. We work strictly in accordance with applicable regulations and test standards, with the European Pressure Equipment Directive, ASME or EAC. APROVIS offers a wide range of products: For gas treatment, we offer FriCon gas cooling systems, ActiCo activated carbon filters, gas heat exchangers and compactors. The waste gas technology sector comprises waste gas heat exchangers, steam generators, catalysts (Oxi, three-way and SCR catalysts), diesel particulate filters and chimneys. High-temperature heat exchangers and leaking steam condensers are among special applications. APROVIS ensures a long service life for systems and devices thanks to maintenance, service and targeted spare part management. APROVIS means BETTER PERFORMANCE.

Website See all products
ASCENTEC GMBH

Germany

Our extensive experience in the design and construction of several thousand heaters ensures that our work is safe and routine. There has been a growing tradition of constructing heat transfer oil systems in the region around the district town of Wiesloch in Baden over the course of the last few decades. The "Wiesloch" design of these systems has become globally known for its brand and quality. The employees of Ascentec GmbH are all recognised specialists in the industry with many years of professional practice. Many of them come from the former company of "Apparatebau Wiesloch", a pioneer in heat transfer oil systems that is also rich in tradition. That's why it's not surprising that, despite being a young company, we nevertheless have decades of experience in the design, construction and implementation of thermotechnical systems. The choice of the headquarters of the Ascentec company in the industrial area of St. Leon-Rot, in the vicinity of Wiesloch, is not a coincidence either. We feel connected to the tradition of boiler construction that reigns here. Our heat transfer oil heater designs follow the globally known "Wiesloch" design that is valued for its reliability and high quality, and unite this with modern construction methods and insights. Our engineering expertise, in conjunction with close cooperation with selected suppliers and proven manufacturing and installation partners, ensures the consistently high quality and reliability of the products.

Website

Product recommendations

Germany

See more products

KASAG SWISS AG

Switzerland

KASAG is a medium-sized industrial company in Langnau in the Swiss region of Emmental. Since 1929, the company has been creating jobs in this region for a qualified skilled workforce. This hilly region in the canton of Bern, endowed with a beautiful landscape, is not just home to the world-renowned cheese with holes, but also to numerous innovative companies that have gained a great reputation globally. KASAG is one of them. Design and construction of devices, containers, pressure vessels, heat exchangers, fractionating columns, assemblies, etc. for the chemical and pharmaceutical industries, as well as food, environmental and bioengineering. Engineering and manufacture of batch cooking plants for producing fruit bases, jams, compotes, marmalades, sauces, vegetables and other foods. Engineering of installations for heat recovery from waste water systems, as well as production and assembly of sewer heat exchangers for different types of sewers.

Website See all products
KENDRION KUHNKE AUTOMATION GMBH

Germany

Kendrion Kuhnke Automation is your specialist for magnet, fluid and control technology and offers safe, precise and innovative components and assemblies for a wide range of applications. Kendrion Kuhnke Automation is part of the industrial division of Kendrion N.V. und trades under the Industrial Actuators and Controls (IAC) business unit. When it comes to developing and manufacturing electromagnets and actuators, IAC benefits from over 100 years of experience and offers a wide range of products. In addition, IAC is a fluid technology manufacturer specialising in the development of custom valves, valve blocks and pressure regulators. In the field of control technology, IAC uses the internationally recognised industry standards in order to enable integration into a wide variety of infrastructures, as well as inductive heating systems that enable emission-free heating in industrial processes. Our products are primarily used in medical equipment, such as dialysis machines, anaesthesia machines, respirators, dental units, treatment equipment and therapy equipment. They are also used in automation and robotics, such as for FTS, material handling systems and cobots. Furthermore, they are used for mechanical engineering in the food and drink industry, in printing and paper processing and in the textile industry. Further applications include fire protection and access controls in building technology and emergency oxygen supply and in-cabin applications in aviation. Find out more about Kendrion at www.kendrion.com

All the products for "heat engineering systems"

Roller inductors

MHS Controller PROFINET

MHS Induction generator 4 x 7,5 kW

MHS Induction generator 6 x 3 kW

Surface mount inductors

Website See all products
BBS GMBH

Germany

BBS GmbH, based in Freiberg am Neckar, Germany, has over 75 years of experience in the field of industrial heating technology, thermal post-combustion and boiler design. BBS GmbH was established in 2004 through the merger between BAY Wärmetechnik GmbH and Bay Engineering und Consulting. The new company united the production of industrial boiler systems with the expertise required for engineering modern energy systems and environmental technology. In addition to manufacturing serial products, we also develop and manufacture boilers and apparatus for special applications employed in the cosmetics, chemical and petrochemical industries. Our scope of operation includes steam boilers, hot water boilers and thermal oil boilers. Pure steam generators and waste heat steam boilers for a wide range of applications are also part of our product portfolio.

Website
DHD CLEAN PARTS GMBH & CO. KG

Germany

DHD Clean Parts GmbH & Co. KG was founded in November 2017 after the separation of DHD Technology GmbH & Co. KG. DHD Clean Parts GmbH & Co. KG's key area of expertise is industrial parts cleaning. In addition, DHD Clean Parts GmbH & Co. KG also runs a laboratory for residual dirt analysis. This is where testing to ensure internal quality assurance is carried out, as well as testing on behalf of our customers. This laboratory acts completely independently of the company's other business activities. Our customers are in the automotive industry, as well as their suppliers, the electronics and electrotechnical industry, the heating systems and heat technology sector, mechanical engineering, environmental and process engineering and many more sectors of industry.

Website
TEXA INDUSTRIES SRL

Italy

Texa industries offers a complete range of solutions both for air conditioning as well as for industrial cooling and represents a single and complete partner for its customers in regards to all thermal handling requirements. More specifically, the company manufactures air conditioning and heat exchange systems, ventilation systems and accessories for electric panels, industrial cooling and thermoregulation systems that are strictly "Made in Italy". Trough its advanced sales and distribution network, Texa Industries has a direct presence in five continents and twenty-two nations. It also has an international group of technicians and engineers that assures a consistent customer service worldwide. Although the company offers a well structured product catalogue it can offer tailored solutions and projects according to the customer's requirements.

Website
EZM EDELSTAHLZIEHEREI MARK GMBH

Germany

The EZM Edelstahlzieherei Mark manufactures drawn, sanded and polished bright steel using the cold deformation process and standard profiles and custom profiles according to customer drawings in almost all steel materials. Our high quality products usually end up being used in system and mechanical engineering, the automotive industry and in medical and energy technology. Drum dyeing machines and spring production machines from the brand Proll & Lohmann as well as heat and chemical surface treatment from the brand BAK are manufactured at EZM Edelstahlzieherei Mark's Werdohl plant. Among other things, the EZM metal working and service GmbH makes spindle bearings, straightening machines for round and profile materials with powered straightening rolls as well as custom orders. The innovative combination of heat, blasting, straightening, milling and planing processes at the EZM profile machining plant in Rohr/Thüringen represent a cost-effective alternative able to compete with traditional manufacturing technologies.

Website See all products
STRIKO VERFAHRENSTECHNIK GMBH

Germany

STRIKO Verfahrenstechnik GmbH is a manufacturer of bursting discs, static mixers, heat exchangers and demisters. Are you looking to professionally secure your equipment against over- or underpressures, and ensure that your mixing, tempering and separating processes are carried out competently and reliably? If so, then you've come to the right place: At STRIKO Verfahrenstechnik GmbH, we produce custom solutions on a daily basis, project by project. No matter whether it concerns pressure safeguarding, static mixing, heat transfer of viscous liquids or droplet separation – when innovative components and value-added solutions for state-of-the-art process technology are called for, we are the right people to turn to. To guarantee the safety and productivity of your plant, we at STRIKO draw upon on the expertise of our engineers, our proven product lines and the effectiveness of our tailored systems. The result: Individualised, precisely tailored solutions that lead to increased productivity and reduced costs.

Website
IRLBACHER BLICKPUNKT GLAS GMBH

Germany

For over 80 years, Irlbacher Blickpunkt Glas GmbH has been an innovative company in the field of glass processing. The products we manufacture have applications in mechanical engineering, construction and sanitary technology, domestic heating, the household appliance and lighting industry, as well as the technology industry. We consider ourselves to be not only glass suppliers, but also problem solvers for demanding tasks. We develop new system solutions for and together with our customers. We supply specialised glass made to individual design requirements and the highest safety standards. Our decades of experience mean there are few limits to our glass processing capabilities.

Website

INDUSTRIEBEDARF CASTAN GMBH

Germany

Industriebedarf Castan GmbH in Freiberg am Neckar is a technical wholesaler for hoses, pipes and valve technology, technical rubber goods, pellet storage, silicone elastomers and wine protection technology with over 40 years' experience. We offer you an extensive range of products for industrial hoses, valves, seals, silicone products and technical plastics for the chemical, food, bulk material handling industry and mechanical engineering. Our range also includes accessories for transporting pellets and woodchips for wooden heating systems from the silo tanker trailer right up to the boiler. Our expertly trained team is ready to give you advice so that you can find the best solution for your application. Our service also includes picking and installing hose lines by our expert staff and strength testing in accordance with the Pressure Equipment Directive and the repeat test according to TRAS 1201/1203.

Website
REINHARDT GMBH

Germany

Reinhardt GmbH is a medium-sized company with headquarters in Villingen-Schwenningen (Black Forest) and is one of the global market leaders for thermal engineering solutions up to 650 °C for the sectors of industrial ovens as well as heat treatment, coating and slush moulding systems. For Reinhardt, quality is the top priority. From the initial consultation to the finished project – our full attention is focused on our clients and their products. Our objective is to offer consultation on equal terms in every situation, enabling us to guarantee consistently high quality and meet practically all demands. Our decades of experience speak for themselves. This in-depth knowledge is reflected in every employee and significantly defines our business. Despite this, we never stay static. We are always developing our products further, allowing us to remain a global market leader.

Website See all products
TITANIUM METALS (UK) LIMITED

United Kingdom

Titanium is a high strength low density metal, with high corrosion resistance. Titanium can be welded, machined and formed the same as any other steel. Titanium has a melting point temperature of 1668°c which is greater than steel yet titanium weighs almost half that of stainless steel. Due to its unprecedented strength and non-corrosive characteristics, titanium is the metal of choice for engineers in the aerospace, petrochemical and medical industry. The higher strength of titanium enables engineers to use thinner materials, which in turn saves material costs and handling charges. Applications: Titanium is used in Aircraft for the engines and frames, Automotive, Petrochemical, Medical implants, Offshore piping systems, Desalination plants, Pulp and Paper plants and Heat Exchangers (tube and compact types) to name but a few. Titanium has found its way onto your local High Street proving itself popular with customers buying spectacle frames, sunglasses, watches and jewellery. It can even be found on the golf course as titanium has been used to manufacture golf clubs. If you have any questions or concerns about using or handling titanium we will do our utmost to help you.

Website
ATT ADVANCED THERMAL TECHNOLOGIES GMBH

Austria

At ATT advanced thermal technologies GmbH, our focus is on innovation. Adopting a scientific approach, quick development times and a high degree of flexibility, we are successful in a dynamic environment. Our multidisciplinary team of scientists, physicists, process engineers, electrical engineers and production experts develops custom-made heating and sensor designs. We use our own simulation tools to predict thermal behaviour for both individual heater constructions and complex components. Our specialities include thermal comfort engineering, whereby we not only support our customers in developing dedicated systems but also in determining their needs. From printed silver heaters to transparent heating units, we offer a wide range of innovative solutions. Our product portfolio includes printed resistance heaters, NTC sensors, ADAS camera and sensor heating, vehicle cabin heaters, battery heaters, seat recognition systems, SCR tank heaters, high-voltage PTC water heaters, seat heaters and underfloor heating for aircraft. Our customers appreciate not only our expertise, but also our flexibility and commitment to their individual requirements.

Website
AXINAR SMPC

Greece

Founded in 2010, Axinar SMPC initially started as a manufacturer of boilers and heating systems. Having mastered metal processing, Axinar has now become a leading OEM manufacturer of high-quality metal parts in the machinery industry, based in northern Greece. Our proven track record as a reliable supplier to major Western European companies speaks to our commitment to delivering superior quality. Equipped with advanced CNC machinery, including lathes, mills, plasma cutters, rollers, and welders, we have the capabilities to manufacture a wide range of precision metal parts to your exact specifications. With a production capacity of 3000 tons per year, we're well-equipped to handle orders of any scale. Our mission is to provide top-quality, precision-engineered metal components and to produce final products that exceed our clients' expectations. We cultivate long-term relationships of trust with partners and suppliers, maintaining a high level of service. With over a decade of experience, we deliver exceptional solutions tailored to meet your specific needs. Our production line is designed to meet short time frames without compromising quality.

Website See all products
AZ INTEC GMBH

Germany

AZ INTEC GmbH – your certified partner since 1979. We are a family business focused on production, development and OEM. We offer a full range of products and solutions for a multitude of applications. You can get all the parts individually or in customized plug & play assemblies which are ready for your production line. Products: • Shut-off and control valves• Fittings and valves• Pre-assembled hoses made of elastomer (rubber and plastic)• Stainless steel corrugated pipes and hoses• Pre-insulated solar hoses• CATS® – assembly system• Other assembly systems. Media: • Fuel gas• Technical gases• Oxygen• Drinking water. You can find our products and assemblies in use in: • Heat exchangers• Medical applications• Respiratory protection• Renewable energy• Solar panels• Heating and cooling applications• HVAC• District heating• Automotive industry• Building services engineering• Chemical industry• Trace heating• Security technology• Domestic installations (water and gas) – CATS® self-assembly system

Website See all products
JET FLOW TECHNOLOGIES UK LIMITED

United Kingdom

Jet Flow UK is engineering company and a leading supplier of energy efficient industrial equipments for process and power sectors. With our strategic partnership with Jet Flow Technologies India, you have the option to buy, either Made in India or Made in Europe. Our design and engineering headquarter is located at Chennai in India and we at Jet Flow UK serves our customer partners primarily in Europe. We are relatively a young team of expert engineers and renowned technocrats supported by the promoters who have acquired high end technologies from the west and are in the field of handling steam for over three decades. We have three divisions, namely Vacuum, Valve and Heat Transfer Division. We design highly advanced engineering equipments in steam & vacuum technologies and special valve solutions, meeting customers' most critical applications, improving process efficiencies and performance and helping in energy conservation. Jet Flow specialize in design, manufacturing and supply of Steam Jet Air Ejector (SJAE), Turbine Vacuum System, Multiple Stage Steam Jet Ejector Booster, Steam Jet Ejector with Water Ring Vacuum Pump Combination System, Steam Jet Thermocompressor, Jet Mixer, Liquid / Water Jet Ejector, LP / HP Feed Water Heater, Steam Surface Condenser, Gland Steam Condenser, Shell & Tube Heat Exchanger, Lube Oil Cooler, Turbine Bypass Valve/System, Steam Conditioning Valve, PRDS Valve, Steam Desuperheater, Pneumatic Control Valve, Angle Type Control Valve etc. etc.

Website See all products
PHILLIPS & TEMRO INDUSTRIES EUROPE

Belgium

Phillips and Temro is a global market leader who provides thermal and electrical products across diverse industries and markets that improve safety and comfort, while maximizing equipement performance and reliability. Phillips and Temro offers the following products: -Engine heating oelectrical preheaters oair intake heaters obattery heaters ocirculation heaters -Fuel and fluid warmers -Idle elimination -Cooling and ventilation systems Phillips and Temro serves the following markets: -Power Generation -Automotive – light end heavy duty trucks -Off-road -Oil & gas -Power sports

See all products
PLANT OF TECHNOLOGICAL EQUIPMENT, LLC

Ukraine

Our company since 1998 (since 2004 LLC "Plant of technological equipment") has been produced mixing, dispersing, homogenizing and capacitive equipment, which is used in paint, food, pharmaceutical, cosmetic, petroleum-refining, chemical and other industries. Today it is a modern enterprise, which professionally produces practically the whole range of equipment for the production of paint products. We design and manufacture: ball, horizontal and vertical bead mills; dissolvers of different volumes and purposes, with manual, electro-mechanical, and hydraulic lifting tools; both, fixed and mobile vessels; vacuum dissolvers, mixers with various mixing systems, with heating or cooling jackets; attritors; stirrers reactors; tanks up to 50 m3, including stainless steel; vessels, mixers, pumping-filtering stations, laboratory bead mills and dissolvers, and a lot of other equipment. We successfully cooperate with companies from the EU, such as UAB "TOPCOLOR" Co. Ltd (Lithuania), CREBONIT COATINGS GmbH (Austria, Poland), Firma Stucco Naturale (Austria), etc. There is no ready-made equipment. Our company manufactures equipment for each individual client, taking into account his technological tasks and wishes (characteristics, parameters, equipment color, etc.) If necessary, we can make the equipment you need specifically for your project. If there is no such project, our engineers will design the equipment in accordance with your technological task, and we will manufacture it

See all products
HERRMANN ULTRASCHALLTECHNIK GMBH & CO. KG

Germany

Herrmann Ultraschall is a world leader in ultrasonic welding with five decades of expertise. With our 360 ° ULTRASONIC ENGINEERING we offer customer-specific support from concept to production and after-sales support. For our customers we are both consultants and solution providers for welding projects. Through our global network, we have ultrasonic laboratories in 18 countries to support you locally. Ultrasonic welding is joining without gluing, screwing or heat input from outside. As an economical production process with fast cycle times, it offers high process control and reproducible quality. We offer suitable platforms for a variety of applications: - Ultrasonic welding systems for thermoplastic parts - Ultrasonic sealing systems for packaging - Ultrasonic joining systems for nonwovens and foils - Ultrasonic welding systems for non-ferrous metals like aluminum and copper Our ultrasonic technology is used in many industries, such as medical, automotive, packaging, hygiene and energy storage. Our state-of-the-art machines and systems meet all the requirements of modern Industry 4.0 production, whether manual workstation or automation, and thus stand for high efficiency and sustainability.

See all products