Germany
Manufacturer/ Producer
Germany
The CONVIMETER® records viscosity efficiently in process of fluids and pastes and can be used for adjustment control, also. Therefore it is a necessary auxiliary system for quality control. The substances can be of low and high viscosities but also newtonian and non-newtonian. Special for non-newtonian fluids it is necessary to record the behaviour of the whole structure of the medium. This is the advantage of CONVIMETER®. The measurement is achieved with a macroscopic shear and low shear rates guaranteeing accurate determination of rheological characteristics. No bearings or moving seals in contact with substance. The circular motion of the sensor gives a pumping effect that provides a quick exchange of substance.
Request for a quoteGermany
The TSSR-Meter can be used to perform conventional isothermal relaxation measurements as well as Temperature Scanning Stress Relaxation (TSSR), an anisothermal stress relaxation measurement method (AISR method). This method can be used to characterize the mechanical-thermal properties of elastomers. An important factor here is the determination of the cross-linking density. With the ever increasing demands on materials, the determination of crosslinking density is an important advantage, and therefore the TSSR meter is particularly suitable for material development and quality control during production.
Request for a quoteGermany
The AQUATRAC-V is a residual moisture meter that can be used in the laboratory as well as in production without qualified personnel. The Measurement is reliable, water-selective and safe using a reagent the calcium hydride. The water released from the sample reacts with the calcium hydride to form hydrogen, which is measured by increasing the pressure in the system and gives a measure of the water content of the sample. This measuring principle is listed in ISO 15512:2019, "Plastics - Determination of water content" as method e.). The same standard also contains the Karl-Fischer measuring principle. The measuring instrument has a robust construction and is designed for use without qualified personnel in production and laboratory. This makes the AQUATRAC-V the world's only standard-compliant water-selective measuring instrument for use in production.
Request for a quoteGermany
The AQUATRAC Station is a residual moisture meter that can be used both in the laboratory and in production without qualified personnel. The measurement is chemical-free and water-selective by means of capacitive dew point determination. The device is browser-based, so that complete access to all functions is possible via Chrome, IE, Firefox, etc. via network, smartphone, tablet or PC. A freely configurable material database and user-based user database with rights assignment that can be configured in small steps make working with the station simple. A Precisa scale can be coupled via USB to transfer the sample weight, and an optional label printer and signal light are available. Variable, freely combinable abort criteria for a measurement are the measuring time, the gradient H2O/min and a maximum moisture content. This makes the instrument flexible, highly precise and easy to operate both in production and in the laboratory.
Request for a quoteManufacturer/ Producer
Kulturstraße 73
47055 Duisburg - Germany
Germany
The new strain gage amplifier with IO-Link interface enables digitalization of the measurement technology right from the sensor. Its compact design and high degree of protection allow the instrumentation amplifier to be used practically anywhere in the field. Strain gage sensors typically have an output voltage of a few millivolts. In industrial environments, e.g. in the vicinity of electric motors or frequency converters, interference can affect the measurement result when transmitting analog signals. This is reliably avoided using the new strain gage amplifier with IO-Link interface. The analog link between the sensor and instrumentation amplifier is kept as short as possible, the standardized IO-Link communication is fully digital and interference-free. The amplifier is powered directly via the IO-Link interface – a standardized 5-wire cable with M12 socket. Strain gage sensors can be connected via a 4-pin M8 connector.
Request for a quoteGermany
Overpressure or underpressure - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, durable design
Request for a quoteGermany
Lite version - 1-channel application only - Overpressure or vacuum - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, long-life version
Request for a quoteGermany
DIGIFORCE® 9311 is the new standard in efficient quality control. The pioneering force/displacement controller delivers rapid, precise evaluation results for applications that demand both high quality and high productivity. The smart performance features and intelligent hardware make test equipment quicker to set up, easier to use and capable of automatic integration in modern production systems. This unrivalled product specification gives businesses the added security and dependability they need for increasingly complex production processes. The DIGIFORCE® 9311 monitors processes in which precisely defined functional relationships need to be demonstrated between two measured quantities of the process. For instance when recording and monitoring processes such as press-insertion, joining, riveting, stamping or caulking, reliable quality control depends on synchronous and high-speed acquisition of measured values combined with analysis based on versatile evaluation elements.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.