Tapping valve bridge with lateral outflow and integrated stainless steel drill milling cutter Model 762 (for plastic pipes (PE oder PVC) Tapping valve bridge with stop valve and for tapping 1½“. The upper part of the milling valve for tapping is already mounted under pressure - ready for use. The tapping cutter with chambered sleeve prevents the drilling chips from being flushed out. The seal material corresponds to the KTW-recommendations of the Federal Environment Agency (UBA) as well as to the requirements acc. to DVGW W270. Application • for plastic pipes (PE oder PVC) DN 50 - 200 • for water PN 16 until DN 150, for water PN 10 until DN 200
Italy
GAMOXTERM EVOLUTION THERMOSTATIC MIXER, WITH FLOW REGULATOR ON THE FORK Steel supply hoses stainless steel length 110 cm Cap 1/2"
Request for a quoteNetherlands
AVK tapping saddles can be installed on cast iron, copper, steel, asbestos cement and plastic pipes. The rubber lining of tapping saddles guarantees a leak-tight connection, even with rough pipes surfaces. AVK uses rubber lining with a special trapezoid wafer design with rounded tops where other use a standard square profile. The rounded trapezoid design provide superior sealing characteristics. AVK REWAG tapping saddles are suitable for water, gas, industry, sewage and fire-fighting segment. Our tapping saddles are easy to install, maintenance-free and designed for long life. The AVK tapping saddles can be used within the markets: industry, shipbuilding, gas, sewage, water and firefighting.
Request for a quoteAustria
PVC, T-ball, DN10, solvent socket, from d16 - d50, optical and electrical position indication, manual override, chlorine and sea water proof, protection code IP 65, PN3
Request for a quoteCreate one request and get multiple quotes form verified suppliers.