1.Loadbearing lower case profile within base surface of width is ; 54,5 mm, aforesaid other loadbearing profile; within upper case is 46,4 mm. Existence of these profiles inside; there are two channels operating separately from each other performing the duty of carrier. 2.Through vertical height of lower carrier; cubicle waterspout is implemented. The height of initial cubicle is 11 mm and is inclined. 3.By courtesy of trio cubicle profiles; the exterior is out of sight and air ingression is prevented directly. 4.Under favour of lenghtwise hair cord channel at case profile , hair cord might be implemented continuously. 5.Within moving wing profile; thanks to centering channel ; axial run outs are prevented. Additionally; carrier profile ; preserving any excess sealant within joint of glass and aluminium. 6.Aluminium caps shutting down the wing profile outrightly moreover plastic cap is not used within wings. 7.
Turkey
Aluminium spacers are the first types of spacers manufactured by NEDEX. In order to meet the requirements of various markets, aluminium spacers are produced in many dimensions for insulating glass. Aluminium spacers are made for cut & plug applications, with plastic corner connectors and for machine bending with metallic straight connectors. The thickness of the aluminium materials varies from 0,18 mm for lower thermal conductivity and cost efficiency to 0,35 mm for bendability and strength.There are different sizes of aluminium spacers with a nominal width of 6 mm and 24 mm. The standard lengths of the aluminium spacers are 3 m, 5 m and 6 m. Other lengths are optional on request. Name, date and imprint are available. In addition, if required, NEDEX can produce colored spacers in many colors using powder coating technology. A minimum of oil is required for chemicals to adhere better to aluminium spacers. The production of spacers is fone with the latest roll formin
Request for a quotePortugal
This device comprising of two pieces located in the window ironmongery, allows a tiny opening (6 to 8 mm) that ensures a slow and gradual air entry whilst maintaining the window in the closed position. It can be applied to all types of openings: practicables, turn/tilts and sliders. The microventilation's mechanism for practicable and turn/tilt Windows can be regulated allowing variations in the ventilation flow.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.