Pig iron is one of the most liquid alloys due to its technical qualities and optimal price. Improvement of production and technological processes, updating of equipment and the qualifications of our specialists allow us to offer our customers high quality casting and service. Casting of cast iron by the method of casting in sandy clay molds The size of the castings 460 mm x 360 mm; Casting height up to 400 mm; Casting weight from 0.2 kg to 20 kg; The productivity of each line is 120 molds per hour. Casting of cast iron by the method of casting in sandy clay molds The size of the castings 1550 mm x 1200 mm; Casting height up to 600 mm; Casting weight from 50 kg to 2500 kg; Productivity 6 10 molds per hour. cast iron of the following grades gray cast irons SCh 15, SCh 20, etc.; high strength cast irons VCh 450 10, VCh 400 15, VCh 420 12, VCh 507, VCh 603, etc.; low alloyed silicon heat resistant and wear resistant cast irons ChKh, IChKh, ChS, ZhChS
China
Material:Grey Iron: GG15, GG20, GG25, GG30 Ductile Iron: GGG40, GGG45, GGG50, GGG60, GGG70 Process: Resin sand casting, Film-covering sand casting, Clay sand casting, Hand molding and machine molding Application: Agricultural machinery, Off-shore industry, Printing machinery, Waste treatment machinery, Concrete plant equipment, Packaging machinery, Pumps
Request for a quoteFrance
Housing, grey cast iron. Bearing, ballbearing steel 100Cr6. Seal, rubber NBR. Pillow block bearings consist of a sealed singlerow ball bearing with a spherical outer ring which is mounted in a housing. Because of the spherical outer surface of the bearing, shaft misalignment can be compensated for. The bearings are manufactured with a plus tolerance. This results in transition or press fits when using shafts with htolerances. The shaft is secured by grub screws on the inner ring. In normal applications, pillow block bearings are maintenancefree due to the lifetime lubrication. In difficult environmental conditions relubrication can be carried out over the grease nipple. All housing dimensions are nominal dimensions for which the usual casting tolerances must be taken into consideration.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.