Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities The signal wires are connected to the module by plug-in connectors in the front plate.Current 0(4)…20 mA Accuracy 0.01% (FS) Resolution 16-bit (1 µA) Sampling rate 5ms / 200 Hz Galvanically isolated fieldbus Operating temperatures -40…+85 °C Supply voltage 9…36 V DC Connection via circular plug-in connectors Fieldbus CAN Protocol CANopen / Raw CAN
Germany
Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate.Voltage +/- 10 V Accuracy 0.01% (FS) Resolution 16-bit (1 µA) Sampling rate 5ms / 200 Hz Galvanically isolated fieldbus Operating temperatures -40…+85 °C Supply voltage 9…36 V DC Connection via circular plug-in connectors Fieldbus CAN Protocol CANopen / Raw CAN
Request for a quoteGermany
Voltage +/- 10 V Current 0(4)…20 mA Accuracy 0.01 % (FS) Resolution 16-bit (1 mV / 1 µA) Sampling rate 20 ms / 50 Hz Galvanically isolated fieldbus Electronics protected up to 40 G (option) Vibration resistant up to 4.5 Grms (option) Feldbus CAN Protocol CANopen / Raw CAN
Request for a quoteGermany
Varying ambient temperatures from cold winters to summer heat, resistance against environmental influence, such as shock or vibration – these are the main requirements for agricultural technology. Before these vehicles go into series production, they are thoroughly tested in extreme conditions – day and night. In tough test applications, the CAN bus technology from MicroControl ensures reliable data transfer between vehicle components and the testing facility.
Request for a quoteGermany
MicroControl now offers a software package with versatile additional benefits – the new CANpie FD Server. All kinds of system conditions can be simulated before the final set-up of the system and cost-intensive “surprises” are avoided. The CANpie FD Server opens new dimensions. This feature is included in the software package without any additional costs.
Request for a quote